Follow or Subscribe
Upcoming Posts
- The Disconnect between CAD and Today’s Design Process
- The Change of Face in Vuuch v5
- Siemens PLM’s Active Workspace
Don't miss it - Subscribe by RSS.
Simulation Management Archive
-
Can SDM Be Effective without CAD PDM?
Posted on May 7, 2012 | 1 CommentA little while ago, I started writing a good bit more about simulation topics. In particular, I’ve been looking closely at Simulation Lifecycle Management, both in general as well as... -
The Second Incarnation of MSC Software’s SimManager
Posted on March 26, 2012 | 2 CommentsA few weeks ago, I published a post titled The Misnomer of Simulation Lifecycle Management to kick off a longer and deeper look at the current state of these types... -
A Look at Dassault Systèmes’ SIMULIA SLM
Posted on March 8, 2012 | 2 CommentsEarlier this week, I published a post titled The Misnomer of Simulation Lifecycle Management. There I covered some definitions of both Simulation Data Management (SDM) as well as Simulation Lifecycle... -
The Misnomer of Simulation Lifecycle Management
Posted on February 27, 2012 | 3 CommentsIt doesn’t seem like it was that long ago when we started hearing about Simulation Lifecycle Management (SLM). But blink your eyes and its five years later. When software providers... -
The Pitfalls of Multi-Disciplinary Simulations: Divergent Model Abstractions
Posted on October 18, 2011 | 10 CommentsFor the past few years, most of the simulation and analysis industry has been abuzz about multi-disciplinary (MD) simulations. And rightly so. MD analysis offers a far more realistic view... -
Is Teamwork the Key to Simulation Driven Design?
Posted on December 17, 2010 | 16 CommentsBack at the beginning of December, I published a post titled The Very Real Skillset Challenges of Simulation Drive Design. It identified four main areas of knowledge or skills needed to really make a simulation driven design initiative successful including. It also looked at some typical engineer roles and their ability to gain and keep these four types of skills or knowledge. -
What is the Impact of Siemens PLM’s HD Strategy on Decision Support?
Posted on September 14, 2010 | No CommentsSiemens PLM's HD strategy provides stakeholders a way to visually access and navigate information in Teamcenter, Siemens's PLM offering. For stakeholders that are not heavy PLM users and tend to avoid textual navigation of the system, this new framework provides an easier and faster way to get to information yourself. However, to utilize these capabilities, you will need to familiarize yourself with the attributes used in the PLM system and be somewhat technically savvy. -
Identifying Form, Fit and Function Artifacts in the Product Record
Posted on September 13, 2010 | No CommentsThese two key characteristics are important when you start thinking about how each of these artifacts are being authored as that will directly affect the availability of any information embedded in the files or data it creates. Furthermore, it's important to think about how each of these artifacts are being managed as that will directly affect the propagation of engineering and design change into other dependent artifacts.